| Products > Sandblasting > Pressure Blasters |
| |
Our Sandblasting and Bevel product lines are sold direct to you from Glastar Corporation -
To ORDER NOW or for more information on these products, e-mail your Wish List to Glastar, or call (800) 423-5635 or (818) 341-0301 (fax) 818 998 2078. |
| |
Model 100/100-S |
|
|
|
|
Glastar pressure blasters are especially set up for decorative sandblasting on glass, wood, stone or metal.
Our blasters can be used equally well at low or high pressures. We feature a lightweight 3/8" sand hose and a small nozzle assembly ideal for delicate, finely detailed work, as well as for large blasted areas. The small diameter nozzles we supply with the blasters allows the efficient use of a small compressor (2hp acceptable, 5hp recommended). Larger nozzles are also available.
Minor assembly is required and instructions are included. The model 100-S comes with an air-activated footswitch. The air-controlled valve turns the stream of abrasive and air on and off immediately. This is a very convenient accessory.
|
| |
Features |
|
Glastar sandblasters offer higher quality at a lower cost than any comparable blasters. The units come complete; no extra parts are necessary. This includes:
|
| Specifications |
| Wheels |
yes |
Abrasive
Capacity* |
100 lbs. |
Approximate
Blast Time** |
1-3 hours |
| Hose*** |
10 feet |
* Capacity listed for silicon carbide; with sand, slightly less.
**Estimate based on average abrasive settings and operator techniques.
*** Hoses supplied are all 3/8" i.d., best for most projects an any pressure. 1/2" hose and nozzle assembly available separately for use on very large projects.
|
| |
Pricing |
| Model 100/100-S Pressure Blaster: |
| Pressure Blaster Model 100 B-S | Product #S36016 |
Price:
$875.00 |
Add to Wish List |
| Pressure Blaster Model 100 | Product #S36018 |
Price:
$738.00 |
Add to Wish List |
| Pressure Blaster Model 100 A | Product #S36012-2 |
Price:
$640.00 |
Add to Wish List |
| 1/2" Brass Valve |
Product #S36321 |
Price: $19.50 |
|
| Nozzle Cap 3/8" |
Product #S36338-3 |
Price: $8.00 |
|
| Nozzle Gaskets |
Product #S36338-4 |
Price: $1.65 |
|
| Hose End Adapter (with S36338-3 cap) |
Product #S36364 |
Price: $9.00 |
|
| Hose Adapter 1/2" - 3/8" |
Product #S36362 |
Price: $9.00 |
|
| Sand Hose 3/8" x 10' |
Product #S36351 |
Price: $77.00 |
|
| 4 Way Clean Out 1/2" |
Product #S36406 |
Price: $6.50 |
|
| Regulator |
Product #S36332 |
Price: $62.00 |
|
| Water Separator with Sight Glass |
Product #S36331 |
Price: $62.00 |
|
| Drain Cock 1/4" |
Product #S36334 |
Price: $3.10 |
|
| Pressure Gauge |
Product #S36335 |
Price: $14.25 |
|
| Pressure Release Valve 1/4" |
Product #S36336 |
Price: $24.00 |
|
TOP of page
|
| |
|
|
